Water and Air Infiltration

The WP-8 panel was tested for water and air infiltration per ASTM E331-86 and ASTM E283-84 standards. There was no observable water penetration to the interior face through the panel joints at 6.24 psf pressure differential. Air infiltration did not exceed .04 cfm per square foot of wall area at 1.57 psf.
Exterior wall enclosures for warehouses, factories or offices Insulated soffits Interior partition walls Explosion release wall sections Energy efficient retrofits of existing wall and window systems Exterior wall installation from "inside" the building

Typical WP-8 Applications

Simple design utilizing concealed fastening clips Light weight handling and simple installation Easy notching and cutting (each panel is 8" wide) "Flat" surface appeal The WP-8 panel is able to sustain a 100 mph wind load at an 8'- 0" girt spacing.

WP-8 Panel Features

TEL: 815-733-5044
© 2017 Carron and Company

Insulated Metal Wall Plank

WP-8 Panel

30,000 SF of std and explosion release fastening

Water and Air Infiltration

The WP-8 panel was tested for water and air infiltration per ASTM E331-86 and ASTM E283-84 standards. There was no observable water penetration to the interior face through the panel joints at 6.24 psf pressure differential. Air infiltration did not exceed .04 cfm per square foot of wall area at 1.57 psf.
Exterior wall enclosures for warehouses, factories or offices Insulated soffits Interior partition walls Explosion release wall sections Energy efficient retrofits of existing wall and window systems Exterior wall installation from "inside" the building

Typical WP-8 Applications

Simple design utilizing concealed fastening clips Light weight handling and simple installation Easy notching and cutting (each panel is 8" wide) "Flat" surface appeal The WP-8 panel is able to sustain a 100 mph wind load at an 8'- 0" girt spacing.

WP-8 Panel Features

TEL: 815-733-5044

Insulated Metal Wall Plank

WP-8 Panel

30,000 SF of std and explosion release fastening